Registered withGas Safe
24 hours a day, 7 days a week · every London borough
New systems, radiators, towel rails, underfloor heating and smart controls. Designed around your home so every room actually gets warm.
One heat source for the whole house, with the heat carried to every room.
The boiler heats water. A gas boiler, or increasingly a heat pump, warms the water in a sealed loop of pipework.
A pump carries it round. The hot water is pumped through pipes under the floors to radiators, towel rails or underfloor heating, gives up its heat to the room, and comes back to be heated again.
Controls decide when and where. A thermostat tells the boiler when the house needs heat, and radiator valves set the temperature room by room. Good controls are the difference between a comfortable house and an expensive one.
Wet or dry? Almost every London home has a wet system, meaning water in pipes and radiators. Dry, ducted warm-air systems are common in the US but rare here, so a wet system is what we design and install.
Whether it is a whole new system or one extra radiator, it is sized for the room and balanced with the rest of the house, so nothing runs hot while the far bedroom stays cold.
A full wet system from scratch: boiler, pipework, radiators and controls, designed around a room-by-room heat loss calculation rather than a guess. For houses that have never had central heating, extensions, loft conversions and full renovations.
New and replacement radiators, from standard panels to column and designer styles. Each one is sized for the room it heats, so a cold bedroom gets a radiator that can actually warm it, not just whatever fits under the window.
A heated towel rail on the central heating, or dual fuel with an electric element so it still works in summer when the heating is off. Fitted plumb and level, with valves that match the finish.
Wet underfloor heating runs warm water through pipes under the floor, so the whole floor becomes the heat source and there are no radiators on the walls. Ideal for kitchen extensions and new floors, and it runs efficiently at lower water temperatures.
Thermostatic and smart radiator valves let every room run at its own temperature. Bedrooms cooler, living room warmer, spare room barely on, which is where most of the savings on a heating bill actually come from.
Control the heating from your phone, set schedules around your week, and turn it down when nobody is home. We fit Hive, Google Nest and Vaillant vSMART, set them up on your phone before we leave and show you how to use them.
Want more detail?See our smart thermostat page
Even warmth in every room, including the ones at the far end of the house, instead of one hot room and a lot of cold ones.
A consistently warm house has less condensation, less damp and less mould, which matters for anyone with asthma or a chest problem.
One efficient heat source feeding the whole house, with the heat going where you want it rather than out through an oversized radiator.
Schedules, room-by-room temperatures and control from your phone with a smart thermostat and smart radiator valves.
No portable heaters, no open flames in the room. The boiler is sealed, flued outside and checked every year at its service.
Pipework and radiators last for decades when the water is kept clean with inhibitor and a magnetic filter. That is why we fit both.
Nights, weekends and bank holidays. One number for every London borough, answered by the people who do the work.
If part of your existing system is worth keeping, we keep it. You pay for what your house needs, not for a bigger job.
Gas Safe registered, so the boiler, the pipework and the controls are all done by the same team.
A written quote with the boiler, radiators and scope on it. The invoice matches what you agreed to.
We look at the house, the boiler if there is one, and how the pipework can be run. Every room is measured so the heat loss can be worked out properly.
The boiler, the radiators and their sizes, the controls, the price and how long it will take. If some of your existing system is worth keeping, we will say so.
Pipework run under the floors with the boards lifted and put back carefully, radiators hung level, and the boiler and controls fitted and wired.
The system is flushed, dosed with inhibitor and fitted with a filter, then every radiator is balanced so the whole house heats evenly. We set up your controls and show you how they work.
Radiators, pipework, underfloor heating and boilers we have fitted across London.
Book a site visit and we will measure up, work out the heat loss room by room and give you a written quote.
Every house is different, which is why we price after a site visit rather than over the phone.
| What we look at | Why it changes the cost |
|---|---|
| Size of the house | The number of rooms and radiators, and how much heat each room loses, decides the size of the boiler and every radiator. |
| New system or upgrade | Adding to or improving an existing system is much less work than a full installation in a house that has never had one. |
| Floors | Suspended timber floors make running pipework straightforward. Solid concrete floors mean chasing or surface runs. |
| Radiators or underfloor | Underfloor heating costs more to install but suits extensions and new floors, and runs at lower temperatures. |
| Controls | A basic thermostat, a smart thermostat, or full room-by-room zoning with smart radiator valves. |
One number, every London borough, 24 hours a day. Call 079 1616 8585 or message us on WhatsApp.
Tell us about your home and how it heats now. We will come out, measure up and give you a written quote.
Call 079 1616 8585Accredited, approved & trusted
